Bringing Integrity Back to HVAC
When the temperature drops, and your furnace isn't working, it can feel like a big problem. Before calling for professional help, there are a few simple troubleshooting steps you can take that might get your furnace back up and running. Here are some tips:
A dirty or clogged air filter can cause your furnace to stop working correctly. It restricts airflow, which can lead to overheating and automatic shutdowns. Make sure to check your filter and replace it if it’s dirty. This simple fix could save you a lot of trouble.
Sometimes the issue isn't the furnace but the thermostat. Check to make sure your thermostat has power. If it runs on batteries, replace them and see if that helps. Also, double-check that the thermostat is set to "heat" and the temperature is set higher than the current room temperature.
If your furnace still isn’t working, try restarting it. Locate the main power switch, which is usually a light switch near the furnace. Turn it off, wait a minute, and then turn it back on. This reset can sometimes fix minor issues.
If your furnace isn’t turning on at all, the circuit breaker might have tripped. Go to your electrical panel and look for the breaker labeled "furnace" or "HVAC." If it’s flipped to the "off" position, switch it back to "on."
Blocked or closed vents can cause your furnace to overheat or not heat your home evenly. Walk around your home and make sure all vents are open and not obstructed by furniture, rugs, or other items.
If you have an older furnace with a pilot light, make sure it’s lit. If it’s out, follow your furnace’s manual to safely relight it. For newer furnaces with electronic ignitions, ensure there’s no error code displaying on your furnace’s control panel.
If your furnace is making unusual noises, it might indicate a loose or worn-out part. While this might not be something you can fix yourself, taking note of the sounds can help the technician identify the problem faster.
If you’ve tried these steps and your furnace still isn’t working, don’t hesitate to reach out to us at Pendleton Heating & Cooling. We’re here to help! Our team offers after-hour and holiday emergency services because we know how important it is to keep your home warm and comfortable.
Give us a call, and we’ll get your furnace back on track in no time!
Pendleton Heating & Cooling!
Our certificate of insurance is on file with El Paso County Regional Building.
Our technicians are trained to take exceptional care of your property, from caring for your carpets with carpet protectors to taking extreme care with your new equipment and post work cleanup!
We are HVAC Excellence Certified and also certified with the National Technical Honor Society!
We are your local TRANE® dealer! We have one of the highest levels of customer service and our staff is factory trained in the newest developments of TRANE equipment.
You should have your HVAC system serviced twice a year, once in the spring and once in the fall. This will help to ensure that your system is running efficiently and effectively, and it will also help to identify and prevent any potential problems.
A programmable thermostat can help you to save money on your energy bills by allowing you to control the temperature of your home when you are not there. You can program your thermostat to turn down the heat in the winter and turn up the air conditioning in the summer when you are away or asleep.
The best way to choose the right size HVAC system for your home is to have a load calculation performed by a qualified HVAC contractor. This calculation will take into account the size of your home, the number of windows and doors, the insulation value of your walls and attic, and the climate in your area.